Starlet news, part 2

Week after work in previous post we installed last things on underbody and moved to the filling of welded parts on outside of the car:

Two coats of body filler and sanding did the trick.
Next job was to paint those places with bitumen:

On the pictures with falsh ypu can see the difference, but in sunlight you can barely spot the overlay.
Few finishing touches were done on the back:

Then we installed interior back and cleaned the car entirely:

We did the water test and found out that one rear light sealing is no good.
So we made one out of plastic table mat:

Last finishing touch:

Few words in part 3.